After work is ended, everyone wishes to have a rest a little irrespective of, whether there is it houses or on the nature. Therefore, possibly, each owner of a garden site is interested in equipping a cosy corner for rest. Our offer should show that it is not always connected with the big material inputs.
The Corner which has been taken away for rest, should be somehow fenced off from other part of a garden site. Therefore we will begin a construction as a fence.
Except strong support for which use round columns or beams a minimum 6 h 8 sm in a diameter, we need to fill with something intervals between them. For this purpose it is possible to use old boxes from under fruit. .
At boxes we delete a bottom, we cut off acting corners with external edges and we line frames with nails there where they, are damaged. Then we make that drawing which is necessary to us (it can and differ from represented on drawing) and we connect frames in the set form by means of nails or screws. It is thus important, that joints (from two frames connected with each other) incorporated all time the longitudinal party. On the scheme (at the left below) the connection principle is clearly visible. The sizes of walls should consider that walls did not cave in and provided a strong obstacle. Then we connect walls (also by means of screws) to the columns preliminary strongly dug into the earth. .
All design is some times painted by structure (brown colour), interfering rotting. If we outside plant twisted plants or a bush shortly our corner will take a cosy form.
Benches and a table are equipped by a following principle: we Make two frames from reek in the thickness a minimum of 2 sm and width 6-10 sm which (apparently in drawing below on the right) on corners are cut cross-wise and incorporate glue cold otverzhdenija. Corners arising thus should correspond in the sizes to a thickness of legs of benches at a table. They incorporate to a frame from above and from below (as ladder steps) by means of screws. .
For seats of benches and a table-top we take boards in the thickness a minimum of 2 sm which privertyvaem screws to frames, and sitting and a table-top act extensively on some centimetres. For screws we preliminary bore through deepenings that heads of screws did not act. All edges should be rounded slightly. Then our garden furniture is processed by wood protection frames. After the first layer in 2-3 weeks will dry up, we cover a table-top and sitting by a colourless boat varnish. .
Certainly, this corner for rest it is possible to supplement or vary its registration more and more. It is possible to sheathe, for example, outside separate sites of a frame of our corner boards from the bottoms of our fruit boxes. It can be made by horizontal or vertical drawing in a strip with intervals 2-4 Separate compartments see can be sheathed also (in this case from within) mat pieces.
If there is no the tree creating a shade, it is possible to pull an awning over our corner of rest. Certainly, for this purpose it is necessary to strengthen strongly in the earth some columns not below 2-2,5 m with corresponding adaptations for awning fastening. .
In our cosy corner it is possible to equip and a place for a browning on a grill. In this case it is necessary to provide the fire-resistant basis on which it is possible to put a grill.
If dark brown tone of colouring seems to you mrachnovatym, it is possible to bring in a landscape of a garden site and brighter, motley stains, however all it should be made with taste. .