Both in old, and in new apartment the narrow room is connected with certain problems. Therefore often there is a question that it is necessary to make that the narrow back wall of such room seemed to wider. It is reached as a result of creation of certain designs which simultaneously create possibility of various use of a nayward of a room.
In the top drawing the variant of the equipment of a narrow wall in old apartment with a high ceiling is offered, on bottom the variant of the equipment of the same wall in new apartment where the ceiling height, as a rule, 260 see Main principle of registration of such wall is represented consists in making appreciable its horizontal division. Thus there is an optical impression that the room became wider.
Is better such effect it is reached by means of racks. As well as in the previous heads, we suggest to use for these works a material from old furniture, for example, lateral walls of a case, a door or strong back walls. Certainly to receive racks of sufficient depth, it is possible to stick together and the boards which are available on sale, however, if regiments long, it is necessary to be guided by a strong material. Plates from pressshpana (the pressed shaving) for this purpose are not suitable. .
However, as shown in the given variant, this material can be applied to average racks, for dverok, simple or folding.
However we will consider first of all our variant of a design connected with new apartment. The design consists from stellazhnyh the boards located horizontally along a narrow wall on identical distance one from another. The width of boards should be a minimum 25-30 their Length see is defined by the sizes of a premise. Our variant provides use of four boards. The placing place - bottom two thirds of wall - allows to achieve optimum optical effect. .
In our example there is also an element of vertical division between average boards which simultaneously serves also as a support. In the left box below by means of a vertical cross-beam the branch which can be used for phonograph records is formed; thus the cross-beam has only dividing, instead of bearing function. At bolshej to loading when on regiments put books, radio- and other equipment, it is necessary to connect regiments to a wall strongly. For this purpose we use metal probes or squares. On them boards are imposed and is strong privertyvajutsja from below screws. Depending on width of a room, these fixing devices settle down with an interval approximately 80 see
If you wish to paint a forward edge of shelves of a rack with any intensive paints a counterbalance I blossom walls, horizontal lines should be underlined even more. .
Our top drawing gives a variant for old apartment. We build a rack as a furniture wall with vertical branches, and our offer can be only the general reference point. For a fastening of parts in this case there is no necessity to apply probes; regiments incorporate to vertical walls with the help shkantov or thorns.
The Original form and strong connection turns out, if we underline average section in a design. We can prolong it to a ceiling of a room and strongly tighten screws to a ceiling. Our project provides small branches of a rack which, are now most fashionable. In summary it is necessary to tell and that one colour registration can already make impression that the narrow room became wider. .
For example, in high old apartments this effect is reached if to take a paint
For a ceiling is slightly more dark usual and to prolong it for the top third of wall. Thanking
To it, the narrow back wall will seem more flat and wider. Optical
The effect of that in this case ceiling edge is lowered, softens simultaneously enough
Unpleasant sensation that the ceiling is too high. .
| Located in the middle of a rack (the top drawing see) the part with the small branches, intended for storage of various collections, can be connected to other parts. It is even better, when do a special box which, depending on necessity, it is possible to insert or take out.