Agree that rooms under a roof frequently bear in themselves something romantic. Therefore, likely, there is nothing surprising what young men willingly are engaged in the equipment of the garret rooms which are called still as the mansard.
Such premises have the, absolutely special structure and at the same time such features, as beams, chimneys and oblique inclined ceilings. Our offer on the equipment of a garret room considers these circumstances and unites them to a certain extent in an original ideal variant from which everyone can choose for itself(himself) that approaches it more.
Connected by frameworks of volume of the head, and in interests of more detailed description, we will halve a room and we will tell about the first half equipment. The room plan (below at the left under drawing) serves thus as the general reference point and for two other walls in a combination to second half of room. .
Our program of the equipment concerns first of all zones for work and rest. In the first in the end skosa, allowing us to make one more vertical wall in height approximately 70-90 sm, it is possible to equip a shelf (as it is specified in drawing) which reaches a case described in following section. As a support for the top board of a shelf the beam located at right angle to our shelf and entered in the general design serves. It not only does not disturb to the room equipment, but also creates additional possibilities for storage of various things. If this beam rough, is recommended to board the corresponding width. As a result of it it will be simultaneously wider for a thickness of a board that, certainly, creates side benefits. Now we will return back to a shelf at a back wall. Its division into certain compartments, depends on we are going to place what things indoors. The first basic board passes in our case under the top cross-section bar on distance of 120 sm from it. The further division of a shelf depends on its loading. The convenient interval, for example - 80 see Quantity of internal shelves (cross-beams) is defined by the general height of a shelf. (In our drawing we give only one internal shelf). Depth of a shelf makes 20-30 see .
The Ottoman we will make of four soft elements (porolonovyh pillows in the size 6о h 90 sm everyone). Besides we will construct a box for an ottoman which foot party approaches under a shelf. In this box are screwed approximately on 4см below an upper edge thick rejki and on them stack boards in the thickness 2см. Then from above put soft elements, which on depth approximately 2см utaplivajutsja in an ottoman frame. .
The Headboard of our ottoman can be finished a small working little table which is combined with regiments. Here again it is necessary to use available beam. It forms one of table legs, on the other hand the piece of a board in width strongly joins edge of a frame of an ottoman an edge 20-30 see Then the board of the same width, as a support steals up, and is established under a table-top how is specified in drawing, forming an internal shelf on which it is possible to put the diversified subjects. The width of a table-top - approximately 50 see .
As a back wall of the shelf adjoining to an ottoman, we can use a firm wood-fiber plate (TDVP) or a plywood plate; from an opposite side the table-top leans on bearing rejki, attached to a beam, accordingly to a wall. The desk height - 70-75 see
As is shown in drawing, it is possible to add a table with a shelf with sliding jashchichkom which depth corresponds to a thickness of a beam. .
All connections of wooden elements can be made by means of nails or shkantov.
| If all constructions provided in this room, are carried out from boards with a beautiful structure, will be most correct to varnish only that the tree structure was showed. In other cases it is necessary to paint separate elements with intensive paints, for example temnokorichnevoj or warm ohroj; if walls light or even white, will be very decorative to look a bright yellow paint.