Modern sewing machines for the house use are on sale more often in specially made pieces of furniture often having the form of a small written little table in which it is possible to hide the machine after the work termination. However not in each apartment there is a place for such furniture. Therefore distribution was received by the portable sewing machines having the corresponding case.
The Truth and with these machines there are at times two new problems. Not each table which is in apartment, approaches to place on it the sewing machine, and they, unfortunately, are still too heavy. Besides it is frequent at tables there are no drawers in which it would be possible to put threads and the other accessories necessary for sewing. Therefore our offer is reduced solving this problem, and with the least expenses. .
Frequently our apartments are equipped by wall cases, and is frequent thus between a wall of a room and a wall of the bottom part of a case still there is a free space. Our book gives various offers for use of this space. In this case we wish to place there the portable sewing machine that it had in apartment a constant place. .
For this purpose we will make a locker with regiments in height approximately 70 the Sizes of a locker see should correspond to machine dimensions in a case. In our example all of us time will come back to a question on drawers not to pull out necessary to us for sewing subjects from different corners. If the empty seat which is available in apartment, all the same it is not enough to place this locker it is more convenient, we will move it into available aperture a lateral face provided that depth of our furniture wall corresponds to width of a locker for the sewing machine. .
Now we pass to manufacturing of our locker. It is recommended to use for it a material from old cases; plywood plates from walls or doors of cases are especially suitable for this purpose. We strongly connect to the account of the set sizes of a wall, polik and a cover. It can be made by means of through thorns, shkantov, screws or nails. If we apply nails or screws, it is necessary to drown their heads and to putty apertures so that after locker colouring smooth surfaces were formed. .
In our example we have divided locker top as follows: two drawers and over them two boxes with folding dverkami. It means that we should insert between lateral walls (a minimum at a part closed by folding covers) one strong shelf. For drawers the problem dares by means of a frame. Behind we close this compartment a firm wood-fiber plate (TDVP) or thin plywood.
These inserts simultaneously strengthen our locker (which we for convenience of moving put on rollers). The bottom part intended for the machine, it is recommended to leave opened that the machine was easier for getting therefrom. .
When the locker is put forward, it becomes simultaneously a working little table for sewing. Cover lengthening occurs, apparently in the top drawing, thanks to two leaning back parts which total area corresponds to the cover area. Both parts are connected to a cover by means of hinges. They lean against mobile, postponed metal or wooden support.
In our drawing (below on the right) it is visually shown, how by means of the enclosed laths it is possible to equip inside drawers. Here we have a place for threads and everything that is required for sewing. Rollers do our sewing workshop mobile. By the way, they can be hidden behind a socle. At whom is not present at the disposal of dense and strong wood, can build lateral walls, polik and a cover from joiner's plates with seredinkoj from bruskov.